#CHANGING COMBINATION ON CANNON GUN SAFE CRACK#

Then, make sure to add a new passcode that is simple and short to remember. Use the wire or any other tool that will fit the hole and press the вЂresetвЂ™ button that is inside the keypad of the gun safe. Next, find a thin stick that will go through these holes. Once you find these holes, use a flashlight to look through these small holes.ДЇind the electronic safeвЂ™s back panel and there should be a keypad and other buttons as well.

#CHANGING COMBINATION ON CANNON GUN SAFE CRACK#

Next Method In Opening a Gun SafeДЄs we all know, electronic locks can be difficult to open as they have great security, but there are a few loopholes that we can use to crack open a gun safe with an electronic lock.ДЇirst, check the back or bottom of the gun safe for any bolt opening holes. The reason why we need the sock is that these magnets are quite strong and having the sock makes it easier to move it around. If the safe is bigger, then it will take some time before you can break open the safe. If it is a small safe, there isnвЂ™t much of a surface area, so place the magnet in the front door of the safe till you can open a safe. Since many of the cheap safes use nickel solenoids we need to locate the solenoid. Then, take this and attach it to the gun safe. So, after this take the magnet and put it into the sock.

Get your safe ready that needs to be opened.

The sock that is big enough to handle the magnet.

The pin moves when the coil is energized due to the electronics of the keypad. It is also known as a magnetic piece of hardware. The science behind it is that gun safes mostly have a solenoid which is a coil with spring and pin. Remember that these are powerful and it can destroy your electronics and even lead to death or injuries if youвЂ™re not careful. To do this, we would need a rare earth magnet that is made out of neodymium. If you are interested in car gun safe read the review here: /car-gun-safe/ Can Magnets help in opening a Gun Safe? In this article, we will talk more in detail about the techniques that go behind in cracking the gun safe that is expensive and has an electronic lock.

This will not work for safes that are on the expensive side as they have mechanisms that will hold the lock in place even when the safe is moving. The above technique is great for safes that are in the lower end budget because only they tend to have locks that will lift. You have to get the timing right so that the turning of the knob matches with the brief moment of the safeвЂ™s lock bouncing open.

So, to do this you should drop the safe against the table or whatever surface it is placed on, and at the same time, you keep turning the knob of the safe.

It is an easy way to crack a gun safe such that even a kid could do it, but it is something that needs a bit of practice.

1.3 Using current in opening a Gun SafeДЇirstly, to do this we use a technique known as safe bouncing.

1 Can Magnets help in opening a Gun Safe?.

Changing combination on cannon gun safe